diff --git a/readme.md b/readme.md
index 70e8019..a099036 100644
--- a/readme.md
+++ b/readme.md
@@ -1,22 +1 @@
-Code for the hardware :
-
-- CVM Mainboard GEN2 202410
-
-### How to flash using UPDI
-
-On Arduino IDE :
-
-1. Install the board : http://drazzy.com/package_drazzy.com_index.json
-2. Upload the sketch Jtag2updi to an arduino uno
-3. Shunt the reset pin to the ground with a 4.7uF capacitor
-4. Wire the AVR (ex : ATTiny3226) via the pin 6 of the arduino uno (programmer) to the UPDI pin of the AVR trough a 470k resistor
-
-Use Tinymegacore to upload to the atttiny using platformio.
-
-### TODO
-
-
-
-# Datasheet
-
-
+TBD